Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Hollywood
A gate motor replacement in Hollywood typically runs $850-$2,400 depending on whether it’s a swing or slide operator, the brand already on the property, and whether the post and frame survived the salt air. Most motor repairs run $180-$450 when the issue is a limit switch, capacitor, or photocell rather than a seized gearbox. We dispatch background-checked, uniformed technicians to every Hollywood neighborhood, from Hollywood Lakes down to Emerald Hills, and a live person answers when you call (754) 219-6080, any hour.
Hollywood is where we see the rough side of gate automation more than almost anywhere in Broward. The salt air off the Atlantic hits from the east, the finger canals push more salt from the west, and a lot of the ornamental aluminum gates around here were retrofitted with motors in the late 1990s and early 2000s. That equipment is hitting end-of-life together. We know what that looks like before we even roll up: corroded motor housings, fatigued hinge posts, and operators that never had proper entrapment protection installed in the first place. This page tells you what to expect, what it costs, and how we leave it documented.
Why Vance Gate Repair North Miami Beach Is Hollywood’s Preferred Gate Motor & Opener Company
We work on high-end properties around Hollywood where the gate is not just an entrance. It is the first thing you see from the street and the thing your HOA board cares about most. Custom ornamental gates, matched intercom and camera entry, underground operators, heavy bespoke steel that has to run silently for years. That is the work we take on daily, and it is why the precision matters more than the price tag on this side of town.
What separates us is not a sales pitch. It is a paperwork habit. Adrian Vance started in commercial access-control work in 2014, where every job left a wiring diagram and a photo record because the next technician could not waste a morning guessing. We brought that to residential gates. Before any work starts, you get a written scope and a written price under Haven Standard Clause 1. When we leave, you get a photo log of what we found, what we set, and what we installed. No future technician has to guess. No homeowner pays twice to rediscover the same problem.
Hollywood customers get the same documentation habit that commercial clients demanded for years. That is the honest reason property managers and HOAs around the 33020 and 33021 zip codes keep calling us back.
Our Gate Motor & Opener Services in Hollywood
Motor Repair
Motor repair in Hollywood usually comes down to four things: a failed capacitor, a limit switch set wrong, a photocell misaligned, or a gearbox that has been grinding itself apart in the salt air. We diagnose first, photograph the failure, and hand you a written price before touching a tool. Most repairs run $180-$450. A motor that has seized completely is a different conversation, and we will tell you straight if replacement is cheaper than rebuilding.
Motor Installation
New motor installations in Hollywood often start with an audit of what is already there. The retrofit-era operators from the 1990s and 2000s were installed on posts and frames that may not meet current South Florida Building Code wind-load ratings, which often run 170 mph design wind speed. If the existing mount cannot pass inspection, the scope expands to a full post-and-frame replacement. That is a Hollywood-specific reality, and we price it in writing before the first hole is dug. Installations run $1,200-$3,800 depending on the brand, the post condition, and whether you want intercom integration included.
Linear Motor
Linear is one of the brands we see most on Hollywood slide gates, and a Linear motor swap is usually straightforward when the track is still true. The problem here is rarely the motor itself. It is the track. Hurricane-season winds bend lightweight aluminum slide gate tracks, and once the track is out of plane, no new motor will run quiet or run long. We check track alignment with a laser before we quote a motor, because putting a new Linear operator on a bent track just burns your money twice.
Slide Motor
Slide motors on canal-front properties in Hollywood take a beating that inland Broward does not see. The salt air from the Intracoastal eats through exposed motor housings in five to seven years, and we regularly replace slide operators on Hollywood Lakes and Harbor Islands homes that are barely a decade old. If your gate is on the water, budget for a motor that is sealed or housed, and plan for maintenance cycles measured in years, not decades. Slide motor replacements run $900-$2,200 depending on brand and whether we rebuild the track while we are in there.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Hollywood
We service nine automation brands, and on Hollywood properties you are most likely to see BFT, Linear, Viking, and Ghost Controls on existing gates. We keep common replacement parts for these brands stocked in our service vehicles, which means a motor repair in Hollywood does not always mean waiting on a distributor. The advantage of working with one company that handles multiple brands: we service the motor already on your property instead of steering you toward a replacement you do not need. If you have a Gate Motor & Opener question about a brand we did not name, call and ask. We have probably already worked on it.
Common Gate Motor & Opener Problems We See in Hollywood Homes
- Salt-air motor housing failure. The Atlantic on one side, the finger canals on the other. We see motor housings and solenoid terminals corroded through in under a decade on canal-front streets like the ones off North Surf Road. A sealed housing or a shielded install location extends the life considerably.
- Bent slide gate tracks from storm-season gusts. Lightweight aluminum tracks bend during tropical events, and once bent, the gate binds, the motor strains, and the limit switch starts tripping early. We laser-check track alignment on every slide motor repair in Hollywood before quoting the motor itself.
- Hinge-post fatigue on retrofitted swing gates. The 1990s retrofit boom put heavy ornamental gates on posts that were never engineered for an electric operator. Decades of salt and wind later, the post cracks at the footing. That is a post reset, not a motor repair, and it must meet current wind-load code.
- Legacy operators missing entrapment protection. A lot of Hollywood’s original HOA operators predate modern safety photocells. If a gate reverses by impact rather than by beam detection, it needs a safety upgrade. We will not leave a motor running without functional entrapment protection.
Pricing for Gate Motor & Opener in Hollywood, FL
Motor repair in Hollywood runs $180-$450 for capacitor, limit-switch, and photocell failures. A full motor replacement runs $850-$2,400 for most swing and slide operators, with slide gates on the high end because we usually have track work to do. Motor installation on a new post and frame, which is common when the old mount cannot pass wind-load inspection, runs $1,200-$3,800. Intercom and camera integration adds $350-$900 depending on your existing system. Every quote is written, line-itemed, and handed to you before work begins. No verbal estimate with a surprise at the end. The price on the page is the price you sign.
We also offer a free second opinion on any written estimate from another gate company. Bring the paperwork and we will review it at no cost. If our number is lower and the scope matches, we will tell you. If the other company missed something, we will show you in their own line items.
We Also Serve Cities Near Hollywood
While this page focuses on Gate Motor & Opener in Hollywood, our crews regularly work in North Miami Beach, Miami Gardens, Miami, and Miami Beach. If your property sits on the edge of Hollywood or you manage multiple addresses across south Broward and north Miami-Dade, we can coordinate scheduling so one visit covers the whole portfolio. Dispatch and scheduling are coordinated from our Miami area office, with local crews serving Hollywood directly.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Hollywood
Yes. Hollywood properties sit between the Atlantic Ocean and the Intracoastal Waterway, which means salt-laden air hits gate operators from two directions, not one. We replace motors on canal-front homes in Hollywood Lakes and Harbor Islands every five to seven years, while comparable units in Miramar or Pembroke Pines routinely last ten to fifteen. The answer is a sealed motor housing or a shielded install location, plus an annual maintenance visit where we clean terminals, reapply dielectric grease, and photograph the wear points. Call (754) 219-6080 to schedule a maintenance check before the next hurricane season.
Because of South Florida Building Code wind-load ratings. Hollywood requires gate posts and frames to withstand design wind speeds that often reach 170 mph, and the retrofit-era mounts from the late 1990s and early 2000s frequently cannot pass inspection. When the post is cracked at the footing or the frame flexes under load, a simple operator swap will not satisfy the code and will not hold up. We scope the structural work with the motor replacement, price it in writing, and handle the permit coordination so you are not left dealing with the city yourself. Call (754) 219-6080 for a free on-site evaluation and a written quote that includes any structural reset.
Yes. We integrate new motors with existing intercom, camera, and access-control systems on Hollywood HOA properties regularly, and we do it without ripping out a working system. The key is matching the motor’s control board outputs to the existing entry system protocol, which is something we have done on BFT, Viking, and Linear installs across the city. Before we quote, we photograph the existing wiring and note the current relay configuration, so you get a written integration plan instead of a guess. Call (754) 219-6080 and we will walk the property and put the scope in writing.
Sag at the hinge post in Hollywood almost always means the post footing has failed, not the gate itself. The combination of salt-air corrosion on the post base and hurricane-season wind loading on a heavy ornamental gate cracks the footing over time. The steel or aluminum gate itself is usually still straight. We dig out the old footing, pour a new one sized for the gate’s weight and the required wind-load rating, and re-hang the gate before the motor is ever touched. Pricing depends on footing depth and gate weight, but most post resets run $600-$1,200 before the motor work. Call (754) 219-6080 for an assessment.
Five to seven years on a canal-front property in Hollywood if the motor is exposed to the salt air without a sealed housing. We replaced a corroded FAAC swing gate operator on a canal-front home in the Hollywood Lakes neighborhood where the salt air had eaten through the motor housing in under a decade. The custom ornamental gate’s hinge post had also fatigued, so we cut and repoured the post footing to meet South Florida Building Code wind-load ratings before installing the new motor and recalibrating the loop detector for the tight driveway. That is the typical arc on waterfront Hollywood gates. The motor fails first, the structure follows, and the full repair should address both at once. Call (754) 219-6080 for a written quote that covers the motor and the structure together.
Get Your Hollywood Gate Motor & Opener Repaired Today
If your gate motor is grinding, binding, or dead altogether, call (754) 219-6080. A live person answers, twenty-four hours a day, no voicemail loop. We will schedule a technician for Hollywood, send their name and photo before arrival, and hand you a written price before any work starts. Every visit includes a documented photo record under Haven Standard Clause 4. Every repair is covered by our 365-Day Done Right Promise. If it is not right within a year, we make it right, no argument, no fee.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Hollywood with documented gate motor and opener service.
Gate Motor & Opener in Nearby Areas
